HOW TO PUT UNIVERSAL INVERTER FOR LAPTOPS HARDWARE NETWORKING LINUX SOFTWAREIt Tech Technology

It Tech Technology

COMPUTER HARDWARE NETWORKING

Breaking

Home Top Ad

Post Top Ad

Sunday, May 29, 2016

HOW TO PUT UNIVERSAL INVERTER FOR LAPTOPS

STEP BY STEPS 
HOW TO PUT UNIVERSAL INVERTER BOARD IN LAPTOP.




The use of a universal inverter is an alternative way to overcome the damage to the laptop inverter. Maybe inverter Original / same, hard to come by. And if there are usually very expensive!!! Or with the aim to reduce the cost of the inverter itself.



Basically all the same laptop inverter, depending on the voltage it works. There was a 9-5V or 20V, depending on the type of laptop.
Try to look at the picture below ...



If we want to replace the inverter, so that we need to know is the position + POSITVE ; -Gnd as a source of electricity, and the ENA (enable) and DIP (to control bright / dim). Term other than ENA = Light On / DIP = Adjustment.
Then you can replace the inverter of the inverter used / universal inverter with the same voltage.
Inverter that I use to replace here, Universal inverter type, you can get it here.



In the picture is very clear, you just connect VIN = + U / ENA = ON / DIP = ADJ / GND = GND.
Not easy!!!! Congratulations Creating .. Be careful.!!

Post Bottom Ad